products

NT 100-CO-DP

Part No.: MPHS-NT100-CO-DP-M2P-DP-S(Master to PROFIBUS DP Slave)
MPHS-NT100-CO-DP-S2P-DP-S(Slave to PROFIBUS DP Slave)
MPHS-NT100-CO-DP-S2P-DP-M(Slave to PROFIBUS DP Master)
Gateway CANopen Master: High-End Gateway for demanding conversions

Product Description

Features

  • Integrates a subordinate CANopen network trunk in PROFIBUS
  • Master for up to 126 CANopen nodes
  • Shortest I/O data conversion time lower than 10 ms
  • Device replacement in seconds via memory card based loading
  • Loadable firmware for flexible use of other conversions
  • With USB diagnostic and configuration port

Product Description

netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

 

Technical Details

Product Product Name NT 100-CO-DP
Product Part Number 1716.180
Brief Description Gateway CANopen to PROFIBUS DP
Communication Controller netX: netX 100
Integrated Memory
RAM: 8 MB SDRAM
FLASH: 4 MB serial Flash
Memory Card Type and size: SD or MMC card, max. 2 GByte
Power Supply
Supply voltage: 24 V DC ± 6 V
Maximum Current at 24 V (typically): 130 mA
Typical power consumption: 3,2 W
Connector: Mini-COMBICON, 2-pin
Reverse voltage protection: yes
Requirement to the power supply: For UL conform usage: Device shall be supplied by an isolated voltage source
Communication Interface 1
Communication standard: CANopen
Interface type: ISO 11898, optically isolated
Connector: D-Sub, male, 9-pin
Communication Interface 2
Communication standard: PROFIBUS-DP
Interface type: RS-485, optically isolated
Connector: D-Sub, female, 9-pin
Diagnostic Interface
Type: USB
Connector: Mini-USB, 5-pin
Displays
LED displays: 
  • SYS System status
  • APL Application status
  • COM Communication status
  • LINK Link, ACT Activity
Operating Elements Network address: Network address, 2 rotary switches
Permitted Ambient Conditions
Ambient temperature (operation): 0 … + 60 °C
Humidity: no condensation permitted
Pollution degree: For UL-compliant usage: Device must be used in a pollution degree 2 environment
Device Dimensions (L x W x H): 100 x 52 x 70 mm (without connector)
Weight: appr. 150 g
Degree of protection: IP 20
Mounting: on DIN rail EN 60715
  
Conformity RoHS: Yes
UL Certification UL: The device is UL 508 certified
UL file: UL-File No E334100
  
Conformance with EMC Directives
CE sign: Yes
Emission: CISPR 11 Class A
Immunity: EN 61131-2:2003

Ordering Information 

  • NT 100-CO-DP (1716.180) - Gateway CANopen Master to PROFIBUS DP Slave
  • NXLIC-MASTER (8211.000) - Master license
Back