Part No.: MPHS-NJ-100EN-DN+M(+Master Licence)
MPHS-NJ-100EN-DN(Slave only)
DeviceNet Master/ Slave: Can be mounted at any point of the delivery chain
The universal communication module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.
All types have the compact design of a closed IP 40 module which can be mounted without using tools. Additional costs for the device will not arise because connector and mounting rails are designed as contact areas and cut-outs on the baseboard.
netJACK can be mounted quickly and easily right before shipment - or even by the end customer.
With netJACK customers can realize the full range of communication solutions, e.g. for drives, HMI or ident systems. At the same time, additional functionalities as PLC, visualization or individual applications are possible. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.
Product | Part Number | 1625.510 |
---|---|---|
Brief Description | Exchangeable Module PCI Express - DeviceNet | |
Communication Controllerc |
netX: netX 100 | |
Integrated Memory |
RAM: 8 MB SDRAM FLASH: 4 MB serial Flash EPROM |
|
Power Supply and Current |
Supply voltage: +3.3 V ± 5 % DC Typical/maximum current: 590 mA Typical power consumption: 1,95 W (at 590 mA) |
|
System Interface |
Bus type: PCI-Express, One-Lane-Port Connector type: 40 pin connector (SAMTEC FSI-120-03-G-D-AB) Pin distance/pin width: 0.45 mm/0.55 mm Transmission rate: 1,5 GHz |
|
Communication Interface |
Communication standard (protocol): DeviceNet Interface type: ISO 11898, potential free Connector: COMBICON connector, 5-pin |
|
Diagnostic Interface |
Type: USB Connector: Signal at host interface. Available only if integrated in host system |
|
Display |
Display:
|
|
Environment | Ambient temperature range for operation: -20 °C … +65 °C | |
Device |
Dimensions (L x W x H): Length: 60 mm (without connector), width: 53.4 mm (at front panel) / 50.4 mm (body), height : 25.2 mm (at front panel) / 19.2 mm (body) Weight: approx. 54 g Housing: Closed module Protection class: IP40 Mounting/Installation: Via milled footprint holes in the carrier board and retaining brackets. No mounting accessories required. Mounting/pulling cycles: max. 10 |
|
Configuration | Configuration software: SYCON.net | |
Conformity |
RoHS: yes Reach: yes |
|
UL Certification |
UL type: cURus UL file: E334100 |
|
Conformance with EMC Directives |
CE Sign:yes Emission: EN55011:2009; CISPR 11, class A Immunity: according to EN 61131-2:2003 |
|
Tests |
Shock: EN60068-2-27 Ea Vibration: EN60068-2-6 Fc |