products

NRPEB 52-RE

Part No.: MPHS-NRPEB-52-RE
netRAPID Evaluation Board

Product Description

Features

  • Easy evaluation of netRAPID technology
  • Incl. Real-Time Ethernet slave firmware in limited version
  • Incl. 3 pieces NRP 52-RE for prototyping
  • Incl. all tools and documentation for evaluation
  • One hardware for all Real-Time Ethernet systems

Product Description

netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.

neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.

Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.


Technical Details

Product Product Name NRPEB
Part Number 7600.200
Brief Description Evaluation board including NRP 52-RE
Power
Supply
and Current		 Supply voltage: 24 V DC ± 6 V
Maximum current (typically): 100 mA (at 24 V)
Power consumption (typical): 2.4 W
Host
Interface		 Type: Parallel dual-port memory or serial dual-port memory (SPI)
Connector: 68-pin (X1) or 40-pin (X2)
Communication
Interface		 Communication standard: Ethernet
Connector: 2x RJ45
Diagnostic
Interface		 Type: USB or UART, the support of the diagnostic interface depends on the loaded firmware
Connector: USB: Mini-B, UART: Pin header
Display LED displays:
  • SYS System status
  • COM0, COM1 Communication status
  • GPIO Status
Operating
Elements		 Network address: Adressschalter (*1), (*10), not supported by standard firmware
Push buttons: Reset push button, serial boot mode push button
Permitted
Ambient
Conditions		 Ambient temperature range for operation: -20 … +70 °C, at an airflow of 0.5 m/s
Device Dimensions (L x W x H): 100 mm x 65 mm x 12 mm
Weight: approx. 45 g

 

Ordering Information

  • NRPEB 52-RE (7600.200) - netRAPID Evaluation Board - Real-Time Ethernet
Back