Part No.: MPADFW-KNX-to-DALI
This series of products allows to integrate some DALI & DALI-2 devices into a KNX network.
This series of products allows to integrate some DALI & DALI-2 devices into a KNX network.
The HD67822-KNX-B2 is a DALI / KNX Converter so you can connect a DALI net ( like a light system, Sensors etc.. ) with a KNX network ( like light switches, actuaros etc.. ) in order to exchange informations between the nets.
This converters are very easy to configure and allows you to interface a DALI system with the KNX world.
On KNX side you can connect all the common KNX devices such as temperature sensors, shutters, light switches, actuators, alarms etc.
To configure DALI network and test the communication, it is possible to use the available software that runs with Windows called DALI Console:
It works with the LAN port.
This software is very simple and it allows to see all the DALI devices connected to the converter, the Groups and the Scenes set; set/manage all their parameters.
DALI / KNX - Converter ( Housing type: B, Fixed Terminal Blocks )
Ports | 1xDALI; 1xEthernet | |
---|---|---|
DALI Protocol | DALI | |
Ethernet Protocol | KNX TP | |
Data Rates DALI | 1200 bps | |
Data Rates BACnet | 9600 bps | |
DALI Connector | 2way 5mm terminal block | |
DALI Connector | KNX Bus connector | |
Power Supply | 8..24V AC; 12..35V DC | |
Power Supply Connector | 2way 5mm terminal block | |
Operating Temperature | -40ºC/+85ºC (-40ºF/+185ºF) | |
Dimensions | 36x60x95 mm(DxWxH) | |
Weight | 200g approx | |
Mechanical Fixing | DIN Rail montage | |
Software | SW67822 |
Order Code | Description |
---|---|
AC34011 | Isolated Converter 100..240V AC to 12V DC stabilized - AC/DC |
AC34012 | Isolated Converter 100..240V AC to 24V DC stabilized - AC/DC |
AC34011 | Isolated Converter 100..240V AC to 12V DC stabilized - AC/DC |
AC34012 | Isolated Converter 100..240V AC to 24V DC stabilized - AC/DC |
AC34131 | Patch Cross Cable Cat6 2 Meters |