PCAN-Cable J1939
Part No.: MPPK-IPEK-003009 (Type 1 DEUTSCH-connector to D-Sub)
MPPK-IPEK-003019 (Type 2 DEUTSCH-connector to D-Sub)
MPPK-IPEK-003014 (Type 1 DEUTSCH-connector to 2xD-Sub)
MPPK-IPEK-003015 (Type 2 DEUTSCH-connector to 2xD-Sub)
It allows access to PEAK CAN interfaces.
*Microport is the exclusive agent of PEAK SYSTEM in Taiwan.
Product Description
Description
The SAE J1939 protocol establishes consistent CAN messages for the communication and diagnosis between components of heavy-duty vehicles such as construction machinery, tractors, and agricultural machines. In this area, robust DEUTSCH connectors are often used for on-board diagnostics connection.
The PCAN-Cables J1939 route the CAN lines of the DEUTSCH connectors to D-Sub sockets and thus allow access via PEAK CAN interfaces.
Specifications
- 9-pin D-Sub socket (in accordance with CiA® 106) to 9-pole DEUTSCH connector of the HD series (J1939 type 1 and 2)
- Length 1.0 m
- Without termination resistor
Pin Assignment D-Sub
| PIN | PIN Assigmnet |
|---|---|
| 2 | CAN-Low |
| 3 | CAN-Shield |
| 7 | CAN-High |
Pin assignment DEUTSCH Type 1
| PIN | PIN Assigmnet |
|---|---|
| C | CAN 1-High |
| D | CAN 1-Low |
| E | CAN-Shield |
| H | CAN 2-High (only IPEK-003014) |
| J | CAN 2-Low (only IPEK-003014) |
Pin assignment DEUTSCH Type 2
| PIN | PIN Assigmnet |
|---|---|
| C | CAN 1-High |
| D | CAN 1-Low |
| E | CAN-Shield |
| H | CAN 2-High (only IPEK-003015) |
| J | CAN 2-Low (only IPEK-003015) |
Product Includes...
- PCAN-Cable J1939
1. Prices and Specifications are subject to change without notice
2. Other lengths and special cable makeup on request.