CAN / CANopen / J1939 / NMEA2000 / DeviceNet - Analyzer

Very simple tool for users who need to interface with a device based on CAN (CAN/CANopen/J1939/NMEA2000/DeviceNet) such as motors, sensors and many other devices.

The Analyzer is composed by the software tool and by the Interface to the CAN.

The device HD67316-U-D1 is an Analyzer with the interface port: USB.
The device HD67316-E-A1 is an Analyzer with the interface port: Ethernet.
The device HD67216 is an Analyzer with the interface port: RS232.

The devices are supplied with free software CAN Analyzer for Windows, which can be used for all codes of CAN Analyzer ( ADFweb SOFTWARE SW67216 ).

This tool allows the study and the configuration of CANopen systems using a user interface that allows easy access to the devices and their objects.

Finds its increased use as an indispensable tool for the analysis of systems in the automotive industry and automation industry.

HD67216

CAN Analyzer Hardware and Software ( PC Interface port: RS232 )

HD67316-E-A1

CAN Analyzer Hardware and Software ( PC Interface port: Ethernet )

HD67316-U-D1

CAN Analyzer Hardware and Software ( PC Interface port: USB )

CAN analyzer software

By the main window of CAN analyzer you can be approached to the varius functions. You can selected the type of CAN bus, standard or extended, and set the baud rate of the net. You can monitoread the net by CAN bus load, and have some LEDs for status indicates. By this windows it is possible access to a varius forms, CANopen monitor, CAN monitor, Network manager and CANsender.

Network Manager

This form permits to scan all nodes or a single node, or permits to scan for available nodes. By this form is possible:

• Read and write CAN register;
• Change the state of node ID (pre-operational, operational).

CAN Monitor

This form is available in both types of CAN bus (standard and extended). It visualize all CAN bus frame that pass on the net. It visualize the: COB-ID and the data.

CAN Sender

This form is available in both types of CAN bus frame (standard and extended). By this form it is possible send a CAN bus frame. It include:

• Cyclic transmit function
• Debug function (for transmit only the CAN bus frame you selected)

CANopen Monitor

This form is aviable only if the Type of CAN bus is standard. It visualize all CANopen frame that pass in the network. It visualize the: node, type (SDO or PDO), and the data.

CANopen Filter

By this form it is possible filter the varius frame.

Load EDS file

On the network manager window click on the button “EDS”, appears “ Load EDS file” window.
From this window you CAN load an EDS file for CANopen.

Accessories

Benefits

• CAN Analyzer Advanced 2.0A, 2.0B  (11 and 29 bit identifier)
• Galvanic isolation
• HW filter for CAN/CANopen packet
• Mountable on 35mm Rail DIN  (Order Codes HD67216 and HD67316-E-A1)
• Device table (HD67316-U-D1)
• Industrial temperature range:  -30°C / 70°C (-22°F / 158°F)
• Master DeviceNet
• DLL for customized software