Ultra Fast Programming Speed 

SuperPro 7500 programmers employ a very high speed MCU chip
producing not only reliable programming algorithms, but also
increasing programming speed. Utilization of ARM11 32bit MCU
combined with an internal Linux operating system makes them the
most advanced and versatile programmers in the industry. Superpro
7500 offers 30% higher programming speed and 8-10 times faster
programming speed for eMMC devices as compared to Superpro 6100.

Customized 4 Gang Adapters

SuperPro 7500 can be used to program up to 4 chips at a time. Many
EEPROM / Flash / MCU / eMMC chips are also supported in 2-Gang
or 4-Gang mode to increase throughput by nearly four times!

LAN Mode

Most production programming applications need the programmer to be
operated remotely. On SuperPro 7500, remote controlling can be
achieved using the LAN port. Using the LAN port, programmers can be
connected to a local network and can be remotely controlled via any
computer on the network. In this case, the PC which controls the SuperPro
7500 acts as a server and SuperPro 7500 acts as a client.

Project Files

The project file stores preparations before programming. Users could also
restore and save work environment. The project file includes device type,
buffer data, operation option settings, configuration bit settings and batch
commands. Project files may be password protected to increase security
and reliability when operated by untrained operators.

Auto Function

The Auto function organizes different functions into a sequential group
(erase, blank check, program, verify and protect). Functions are executed
in sequential order similar to a batch command.

Once a chip is inserted correctly, the programmer automatically starts
batch command of erase, blank check, program and verify. Auto chip
detection saves time and increases efficiency.

Production Statistics 

A log file could be used to save operation information before exiting the
program. Log files can also be used to facilitate quality tracking.

This mode is designed for factory volume production. To prevent
operation errors from destroying chips and wrong data written to the chip,
SuperPro will operate in the Auto function mode. The administrator can
set a password to prevent unauthorized access to the system.

Auto Recognition of File Types

We support almost all kinds of known file formats including file formats
with automatic recognition functions: Binary, Intel (linear & segmented)
Hex,Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.

Auto Increment of Serial Numbers

Auto-generation of electronic serial numbers is available on Superpro
7500. This feature is implemented by setting Auto Increment in Operation 
Option. Auto Increment allows users to add unique serial number into the
device. After each successful programming, the software automatically
changes the value by the specified increment mode.

Intellectual Property

Protection Password settings available in both PC and stand-alone mode.

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA
Configuration PROM, FLASH memory (NOR), BPROM, NVRAM,
SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP,
VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON,
EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

USB 2.0, LAN

SD Card

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Main unit: 184(L) x 160(W) x
78(H) mm

Package: 310(L) x 250(W) x
145(H) mm

Main unit: Weight 1.80 lbs (0.80
kg)

Package: Weight 3.80 lbs (1.65
kg)