FlexMedia 100BASE-T1
Part No.: MPSC-FlexMedia-100BASE-T1
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa.
產品介紹
Description
Product Information
The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes. It supports up to 100 MBits in full duplex mode on both sides.
Advantages
-
Master and slave mode selectable via DIP-switch
-
Broadcom BCM89810 transceiver is used for the 100BASE-T1 conversion
-
Supply voltage: 8-48V DC
-
Status LEDs
-
RJ45 connector for 100BASE-TX
-
D-Sub 9 pin male connector for 100BASE-T1
-
IP20
- Temperature range -40°C to +85°C
Technical Details
Electrical Characteristics
| Supply Voltage Operating | +8.0 V to +48.0 V | |
|---|---|---|
| Absolut Maximum (non-operating) | -60.0 V to +60.0 V | |
| Supply Current - Operating | typ: 80 mA | |
Physical Characteristics
| Connectors | RJ45, D-Sub 9 | |
|---|---|---|
| Weight approx. | 145 g | |
| Dimensions approx. L x W x H | 92 * 65 * 28 mm3 | |
Environmental Conditions
| Temperature Operating | -40°C to +85°C | |
|---|---|---|
| Temperature Non-operating | -40°C to +85°C | |
| Temperature Storage | -40°C to +85°C | |
| Relative Humidity | 0% to 90% r. H., non-condensing | |