Ideal for Construction equipment, Cargo and Material handling, agriculture and forestry machinery, fleet management, mining and minerals, electrical vehicles, preventive maintenance and any digital transformation and Industry 4.0 projects demanding Edge computing capabilities.
Description
Quad core open Linux IoT computer for the most demanding Edge computing solutions in Off-Highway environments. The i.MX8 quad core processor includes an Neuro Processing Unit (NPU), giving you the possibiliy to start developing AI applications. This platform has been designed to cover the highest cibersecurity standards, including a secure boot and a TPM 2.0
|
Processor |
i.MX8 M Plus Quad A53 64 bit |
|
Memory |
2GB LPDDR4; 1GB NAND Flash SLC; 8GB EMMC Flash |
|
GSM Communication |
Global LTE Cat 4 |
|
Interfaces |
Up to 4 CAN FD Bus; Wifi & BT 5.0; etc... |
|
Rugged Enclosure |
IP67 / IP6K9K (full protection against dust / water) |
Technical Specification
|
CPU |
-
i.MX8 M Plus Quad A53 64 bit at 1.6 GHz clock speed.
-
Linux Kernel 5.10.72
-
Debian | Yocto Kirkstone Distribution
-
Neural Processing Unit (NPU) up to 2.3 TOPS (optional)
-
GPU (optional) OpenVG 1.1, G2D, OpenGL® ES 3.1 Vulkan®, OpenCL™ 1.2 FP
-
NAND FLASH 1 GByte.
-
EMMC FLASH 8 GByte (options up to 32 GBytes)
-
LPDDR4 2GBytes (options up to 4 GBytes)
-
MicroSD card holder for additional storage.
|
|
LTE Cat 4 / 3G / 2G |
-
LTE FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/ B25/B26/B28
-
LTE TDD B38/B39/B40/B41
-
UMTS B1/B2/B4/B5/B6/B8/B19
-
GSM 850/900/1800/1900MHz
-
LTE-FDD: Max 150 Mbps (DL), Max 50 Mbps (UL)
-
LTE-TDD: Max 130 Mbps (DL), Max 30 Mbps (UL)
|
|
GNSS |
-
Concurrent receiver: GPS/GLONASS/QZSS/BeiDou.
-
72-channel* continuous tracking receiver.
-
GALILEO E1B/C ready.*
-
SBAS: WAAS, EGNOS, MSAS, GAGAN.
-
Update Rate: up to 10 Hz.
-
Accuracy: 2.5 meters CEP.
-
Signal Acquisition:
-
Cold Start: 26 s.
-
Hot Start: < 1.5 s.
-
Active Antenna Power Supply: +3 V @ 34 mA..
* Features availability depending on version
|
|
Interfaces |
-
Up to 4 CAN-FD SIC bus
-
Integrated sensors.
-
Programmable 6 axis sensor, accelerometer and gyroscope.
-
TPM 2.0
-
12 configurable digital input/outputs:
-
50V max inputs (logic low < 1.5 V, high > 3 V).
-
All inputs function as wake signals for low power modes.
-
All inputs can be used as counters (odometer). 32 bit, 3 kHz max.
-
10 open collector outputs (200 mA each).
-
2 high-side switches to Vin for output (1 A each).
-
Short-circuit protection for all outputs.
-
4 analog inputs:
-
12 bit resolution, 1% accuracy.
-
1 Share digital I/O pins and 3 dedicated pins.
-
0-5,12 V (5 mV per bit) or 0-30,72 V (30 mV per bit) configurable by SW
-
Maxim 1-wire
-
microSD card holder
-
1 USB Host 3.0, current limit 900 mA.
-
2 external RS232 ports:
-
1 x (TX/RX/CTS/RTS)
-
1 x (TX/RX) or RS485 (factory option)
-
802.3bw 10/100BASE-T1 (SPE) or 802.3u 10/100BASE-TX
-
Vout 5 V power output (500 mA max).
-
FAKRA antenna connectors
-
4 LEDs for status indication
* Availability of features depends on models
|
|
Power Supply |
-
24 V (9 V to 36 V) DC input.
-
Typical consumption at 24 V
|
OFF |
0.98 mA |
|
Standby |
12.36 mA |
|
RUN |
51.95 mA |
|
RUN + GSM + GPS |
92.6 mA |
|
|
Batteries |
-
Back-up when there is no power supply available.
-
Standard backup battery for RTC. Duration 10 years.
-
Optional rechargeable Li-Ion 3.6V. Inserted via battery cover
|
|
Temperature |
Safety Operating
Temperature Range
without Li-ion Battery |
-40 °C to +70 °C |
|
Safety Purposes
Operating Temperature Range
with Li-ion Battery
|
-40 °C to +55 °C (from external power supply)
-20 °C to +53 °C (battery can power the unit)
0 °C to +45 °C (battery will be charged if external power available)
|
|
|
Rugged enclosure |
-
Environmental protection to IP6K9K standard. (full protection against dust and water).
-
Dimension: L=154 x W=188 x H=62 mm)
-
Weight: 768 gr
-
Material: Glass reinforced polyester.
-
System connectors: TE 776163-1 (35 pins)
-
miniSIM (2FF)
-
MicroSD
|
|
Development Kit Includes |
Developer’s board owa5X, power supply cables, cables for interfaces, antennas, web access to: cross compiler, API´s, libraries, manuals and application notes.(see bellow for more details). |
